Pixel Detectors

Pixel detectors for precise particle tracking in high energy physics have been developed to a level of maturity during the past decade. Three of the LHC detectors will use vertex detectors close to the interaction point based on the hybrid pixel technology which can be considered the state of the art in this field of instrumentation. A development period of almost 10 years has resulted in pixel detector modules which can stand the extreme rate and timing requirements as well as the very harsh radiation environment at the LHC without severe compromises in performance. From these developments a number of different applications have spun off, most notably for biomedical imaging. Beyond hybrid pixels, a number of monolithic or semi-monolithic developments, which do not require complicated hybridization but come as single sensor/IC entities, have appeared and are currently developed to greater maturity. Most advanced in terms of maturity are so called CMOS active pixels and DEPFET pixels. The present state in the construction of the hybrid pixel detectors for the LHC experiments together with some hybrid pixel detector spin-off is reviewed. In addition, new developments in monolithic or semi-monolithic pixel devices are summarized.Comment: 14 pages, 38 drawings/photographs in 21 figure

Trends in Pixel Detectors: Tracking and Imaging

For large scale applications, hybrid pixel detectors, in which sensor and read-out IC are separate entities, constitute the state of the art in pixel detector technology to date. They have been developed and start to be used as tracking detectors and also imaging devices in radiography, autoradiography, protein crystallography and in X-ray astronomy. A number of trends and possibilities for future applications in these fields with improved performance, less material, high read-out speed, large radiation tolerance, and potential off-the-shelf availability have appeared and are momentarily matured. Among them are monolithic or semi-monolithic approaches which do not require complicated hybridization but come as single sensor/IC entities. Most of these are presently still in the development phase waiting to be used as detectors in experiments. The present state in pixel detector development including hybrid and (semi-)monolithic pixel techniques and their suitability for particle detection and for imaging, is reviewed.Comment: 10 pages, 15 figures, Invited Review given at IEEE2003, Portland, Oct, 200

A review of advances in pixel detectors for experiments with high rate and radiation

The Large Hadron Collider (LHC) experiments ATLAS and CMS have established hybrid pixel detectors as the instrument of choice for particle tracking and vertexing in high rate and radiation environments, as they operate close to the LHC interaction points. With the High Luminosity-LHC upgrade now in sight, for which the tracking detectors will be completely replaced, new generations of pixel detectors are being devised. They have to address enormous challenges in terms of data throughput and radiation levels, ionizing and non-ionizing, that harm the sensing and readout parts of pixel detectors alike. Advances in microelectronics and microprocessing technologies now enable large scale detector designs with unprecedented performance in measurement precision (space and time), radiation hard sensors and readout chips, hybridization techniques, lightweight supports, and fully monolithic approaches to meet these challenges. This paper reviews the world-wide effort on these developments.Comment: 84 pages with 46 figures. Review article.For submission to Rep. Prog. Phy

A method for precise charge reconstruction with pixel detectors using binary hit information

A method is presented to precisely reconstruct charge spectra with pixel detectors using binary hit information of individual pixels. The method is independent of the charge information provided by the readout circuitry and has a resolution mainly limited by the electronic noise. It relies on the ability to change the detection threshold in small steps while counting hits from a particle source. The errors are addressed and the performance of the method is shown based on measurements with the ATLAS pixel chip FE-I4 bump bonded to a 230 {\mu}m 3D-silicon sensor. Charge spectra from radioactive sources and from electron beams are presented serving as examples. It is demonstrated that a charge resolution ({\sigma}<200 e) close to the electronic noise of the ATLAS FE-I4 pixel chip can be achieved

Innovating Advanced Radiation Instruments

STREAM is a 4-year multi-site training network that aims at career development of Early Stage Researchers (ESRs) on scientific design, construction manufacturing and of advanced radiation instrumentation. STREAM targets the development of innovative radiation-hard, smart CMOS sensor technologies for scientific and industrial applications. The platform technology developed within the project will be tested in the demanding conditions posed by the CERN LHC detectors' environment as well as European industry leaders in the field of CMOS imaging, electron microscopy and radiation sensors. This leveraging factor will allow to fine-tune the technology to meet the requirements of industrial application cases on demand such as electron microscopy and medical X-ray imaging, as well as pathway towards novel application fields such as satellite environments, industrial X-ray systems and near-infrared imaging. The project will train a new generation of creative, entrepreneurial and innovative early-stage researchers and widen their academic career and employment opportunities. The STREAM consortium is composed of 10 research organisations and 5 industrial partners; the network will provide training to 17 ESRs. STREAM structures the research and training in four scientific work-packages which span the whole value-chain from research to application: CMOS Technologies Assessment, Smart Sensor Design and Layout, Validation and Qualification, Technology Integration, and Valorization

Neutron irradiation test of depleted CMOS pixel detector prototypes

Charge collection properties of depleted CMOS pixel detector prototypes produced on p-type substrate of 2 k$\Omega$cm initial resistivity (by LFoundry 150 nm process) were studied using Edge-TCT method before and after neutron irradiation. The test structures were produced for investigation of CMOS technology in tracking detectors for experiments at HL-LHC upgrade. Measurements were made with passive detector structures in which current pulses induced on charge collecting electrodes could be directly observed. Thickness of depleted layer was estimated and studied as function of neutron irradiation fluence. An increase of depletion thickness was observed after first two irradiation steps to 1$\cdot$10$^{13}$ n/cm$^{2}$ and 5$\cdot$10$^{13}$ n/cm$^{2}$ and attributed to initial acceptor removal. At higher fluences the depletion thickness at given voltage decreases with increasing fluence because of radiation induced defects contributing to the effective space charge concentration. The behaviour is consistent with that of high resistivity silicon used for standard particle detectors. The measured thickness of the depleted layer after irradiation with 1$\cdot$10$^{15}$ n/cm$^{2}$ is more than 50 $\mu$m at 100 V bias. This is sufficient to guarantee satisfactory signal/noise performance on outer layers of pixel trackers in HL-LHC experiments

Prototype Active Silicon Sensor in 150 nm HR-CMOS Technology for ATLAS Inner Detector Upgrade

The LHC Phase-II upgrade will lead to a significant increase in luminosity, which in turn will bring new challenges for the operation of inner tracking detectors. A possible solution is to use active silicon sensors, taking advantage of commercial CMOS technologies. Currently ATLAS R&D programme is qualifying a few commercial technologies in terms of suitability for this task. In this paper a prototype designed in one of them (LFoundry 150 nm process) will be discussed. The chip architecture will be described, including different pixel types incorporated into the design, followed by simulation and measurement results.Comment: 9 pages, 9 figures, TWEPP 2015 Conference, submitted to JINS